Wouldn’t it be easier if your computer was ready for you as soon as you sat down? If you own an Android device, that’s possible thanks to a free app called PC Auto Waker. The setup can be a little complex, but the payoff makes it worthwhile.
Once you’ve downloaded PC Auto Waker off the Android marketplace, you’ll need to set it up so that it has the ability to communicate with your computer. It depends on 802.11 WiFi, but it’s not necessary for each computer to have WiFi hardware. The PC you’d like to wake only needs to be connected to a broadcasting WiFi router.
The basic setup consists of three steps. First, you’ll need to enter a name for the computer you’re going to wake. This name DOES NOT have to be the same as the computer’s network name. This is merely a way of identifying the computer in the app’s interface.
After that, you’ll need to enter the MAC address of the target computer. Do a Windows Search for ”cmd” to open your command line interface, then type ipconfig/all and press enter. The MAC address will appear as a string of six two-digit numbers labeled Physical Address.
Finally, you need to enter the SSID of the wireless network the target computer is connected to. It’s not necessary to enter any security information, regardless of whether the WiFi network is secured or not.
Once you’ve handled all of that, it’s time to see if you’re set! Place your computer into sleep or hibernate mode, and press the Wake All button in the PC Auto Waker app. If it works, great! If not, you have a few other settings to mess with.
First, restart your computer and enter BIOS. This is done by entering the correct key at boot, which should be indicated on the POST screen that appears before Windows beings loading. Once you’ve entered BIOS, look for the Wake-On-LAN setting and enable it. You’re likely to find this along with other settings related to power management or networking, but BIOS vary from computer to computer, so you’ll have to do some digging of your own.
Once you’ve enabled Wake-On-LAN in BIOS, you’ll need to make sure Windows is configured properly as well. Do a Windows Search for Device Manager and open it, then navigate down to Network Adapters. Right-click on the one you use to connect with the Internet and then click Properties. On the Power Management tab you will find three checkboxes. If they’re not already checked, do so.
The Quick & Easy Setup
Once you’ve downloaded PC Auto Waker off the Android marketplace, you’ll need to set it up so that it has the ability to communicate with your computer. It depends on 802.11 WiFi, but it’s not necessary for each computer to have WiFi hardware. The PC you’d like to wake only needs to be connected to a broadcasting WiFi router.
The basic setup consists of three steps. First, you’ll need to enter a name for the computer you’re going to wake. This name DOES NOT have to be the same as the computer’s network name. This is merely a way of identifying the computer in the app’s interface.
After that, you’ll need to enter the MAC address of the target computer. Do a Windows Search for ”cmd” to open your command line interface, then type ipconfig/all and press enter. The MAC address will appear as a string of six two-digit numbers labeled Physical Address.
Finally, you need to enter the SSID of the wireless network the target computer is connected to. It’s not necessary to enter any security information, regardless of whether the WiFi network is secured or not.
Once you’ve handled all of that, it’s time to see if you’re set! Place your computer into sleep or hibernate mode, and press the Wake All button in the PC Auto Waker app. If it works, great! If not, you have a few other settings to mess with.
The Nitty-Gritty Setup
If your computer did not wake it’s probably because the computer is not set up to accept a Wake-On-LAN packet. Fortunately, most computers can be configured so that they will accept it.First, restart your computer and enter BIOS. This is done by entering the correct key at boot, which should be indicated on the POST screen that appears before Windows beings loading. Once you’ve entered BIOS, look for the Wake-On-LAN setting and enable it. You’re likely to find this along with other settings related to power management or networking, but BIOS vary from computer to computer, so you’ll have to do some digging of your own.
Once you’ve enabled Wake-On-LAN in BIOS, you’ll need to make sure Windows is configured properly as well. Do a Windows Search for Device Manager and open it, then navigate down to Network Adapters. Right-click on the one you use to connect with the Internet and then click Properties. On the Power Management tab you will find three checkboxes. If they’re not already checked, do so.
No comments:
Post a Comment